How To Install Window Blinds In Atlanta

Many Atlanta families choose window blinds when they need more privacy and control over natural light in their homes. They’re a practical and budget-friendly window covering. They also take just a handful of steps to place for experienced DIYers. However, nothing is more convenient than hiring a professional window treatment installer. Here are the essential steps of hanging window blinds and when you ought to phone the professionals to do it for you.

Get Precise Measurements

Prior to beginning, decide if you should get inside-mount blinds or outside-mount. This critical decision will tell you where to measure. Take measurements of the width, depth, and height inside your window frame for inside-mount blinds. When hanging outside-mount blinds, mark the height and width of your window, which includes the trim, and add three inches to your measurements to make sure you have proper coverage. Measure with precision–refrain from rounding up or down. Improperly measured blinds will not operate correctly.

Choose Your Blinds

Once you get your measurements, you may find your blinds. You probably know what type of blinds you want. Pick blinds that equal your measurements as closely as possible. Off-the-shelf blinds often won’t fit precisely, either extending out too much or not getting to the end of the window completely. Ensure you have fasteners that let your blinds install at the proper depth, too. You’ll need to order custom-made blinds for a superior fit.

Install Your Blinds

Your blinds might have instructions. Adhere to them to attach your exact product. If you would like a preview of how challenging it is to install window blinds in Atlanta, here are some general steps to offer a general idea.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the window frame around one inch from the edge. Check that this placement won’t hinder the blind’s operating mechanisms. Mark the bracket holes with a pencil.
2. Drill pilot holes in the indicated areas.
3. Situate the bracket holes over your holes and drill in the screws.
4. Redo these initial three steps for the second bracket.
5. Snap the end caps onto the top rail of your blinds. Slide the top rail into the brackets.

Hook on the tilt wand and check it. Additionally, test the pull cord.

Outside Mount Blinds

1. Determine if you’re mounting on the wall above the window or the window’s trim. Hold the headrail in place and make certain the blind extends to the bottom of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark here for the screws.
4. Drill pilot holes as indicated.
5. Situate the bracket holes with your wall holes and fasten with screws.
6. Fit the headrail into the brackets.

Connect the tilt wand and test to ensure everything works.

Pick The Simplest Way To Install Blinds 

Of course, you don’t need to put up blinds on your own. The most effortless way to install window blinds in Atlanta is to hire a professional window treatment installer. They will assist you at every step. They’ll help you pick blinds that meet your needs and preferences, make precise measurements for a made-to-order product, and put them up for you. They support customers daily, so they’ll complete your project quickly and correctly. They will troubleshoot any challenges without taking hours trying to find help on websites. A window treatment expert will also offer higher-quality blinds than online or box stores.

Avoid The Trouble And Have Sunburst Shutters Install Your Window Blinds In Atlanta

Installing window blinds in Atlanta couldn’t be easier when you turn to Sunburst Shutters Atlanta. We’ll help you choose custom-made blinds that will match your windows perfectly, and our expert installation crew will attach them for you. All you need to do is dial 404-962-8517 or submit the form below to schedule a complimentary in-home consultation.